My Old Computer

Introduction

The other day I purchased an old computer. It reminded me of one I had in high school, so I thought I would document some of the things I plan to use it for. It booted and loaded Windows 2000. The owner mentioned only using it for a single task. Note that there is a very loud coil whine sound when switching on the power supply.

Hardware Specifications

  • CPU: AMD Sempron 2500+
  • Motherboard: WinFast 741M01C-GX-6L
  • RAM: 512MB
  • HDD: 120GB SSD (SATA to IDE adapter)
  • Video: Integrated
  • Sound: Sound Blaster Audigy 2 ZS (SB0350)
  • Screen: Samsung Samtron 76e
  • Keyboard: QWERTY
  • Mouse: HP

Old Computer Image

Software

The computer booted into Windows 2000. The CMOS battery had failed so there is an error on startup. I’ve used Drive Snapshot to take an image, and DriverBackup! (1.0.3) to take a copy of all drivers.

Motherboard Specifications

  • Model: K7S741GXMG-6L (741M01C-GX-6L)
  • Processor: Socket A for AMD Athlon™ XP / Sempron™ / Duron™ processors
  • Chipset: SiS741GX + 963L
  • Front Side Bus: 266/333 MHz
  • Memory: DDR 266/333 x2
  • VGA on Die: Integrated Ultra-AGP™II Graphics
  • Expansion Slots: 1 AGP 8X (1.5v only), 3 PCI slots
  • IDE: 2 UltraDMA 133 - supports up to 4 devices
  • Audio: Realtek ALC655 5.1 channel (Drivers)
  • LAN: Realtek RTL8201BL; 10/100 PHY

Back Panel I/O Ports

  • 1 x PS/2 mouse
  • 1 x PS/2 keyboard
  • 1 x line-in / line-out / MIC ports
  • 1 x parallel
  • 1 x RJ45
  • 1 x COM
  • 4 x USB 2.0
  • 1 x VGA port

Internal I/O Connectors

  • 1 x USB 2.0 headers support 2 ports
  • CD IN header

BIOS Features

  • 2Mb flash ROM, PnP, DMI 2.0, WfM 2.0, SMBIOS 2.3, ACPI 1.0b

Standards/Manageability

  • PCI 2.3, USB 2.0, WfM 2.0, DMI 2.0, WOL by PME, LPC 1.1 Interface, PC2001

Form Factor

  • Micro ATX (9.4” x 8.4”)

Possible Drivers

Objective

  • Install Windows 98

Configuration

Drive Preparation

  1. Connect the SSD drive to my main PC and use Rufus to image the drive with DOS.
  2. Copy the WIN98 setup files across.
  3. Connect the SSD to the old machine and run the WIN98 setup.

OS Preparation

  1. Install nusb36e.exe / 7-Zip.
  2. Install IDE drivers.
  3. Install uvga3_363a.zip (manually).
  4. Install Sound Drivers (manually).

Drivers Status

  • IDE: Pending
  • AGP: This appears to fail
  • VGA: This must be installed manually from uvga3_363a.zip
  • USB 2.0: Pending
  • AUDIO: Pending
  • LAN: Pending
This site uses Just the Docs, a documentation theme for Jekyll.